現在編集作業中です。しばらくお待ちください。
We are currently working on editing. Please be patient.
現在編集作業中です。しばらくお待ちください。
We are currently working on editing. Please be patient.
The IDK air duct heater, vertical, horizontal, longitudinal type, etc. that use the sheath heater as a heating element, the assembled to accommodate the ventilation duct, etc., are at various wide variety of the model depending on the operating conditions.
The heater has been used for the surface treatment production line of carbon fiber.
Rating 3 phase 440V 70kW
Temperature: 500℃
Flow: 177m³/min
In air heating, promote small and lightweight, standardization thorough, of course inexpensive prices, fast delivery time, but this product has been designed to allow easy maintenance and inspection in particular.
In the horizontal the terminal box, reduce the heat effect of the heater, so we provided on the opposite side inspection cover, you can easily be replaced with the inspection of the heater.
10kW, 20kW, 30kW, 40kW, 50kW have been standardized.
On the occasion of facility planning, and select the standard model by the following article, we will submit a quotation quickly if you can query.
Specifications are as follows. (Capacity of the heater should be selected from the graph selection)
Material:General Air
Temperature:below 250℃
Pressure:below 3KPa
Min Flow:260Nm³/h
Max Flow:2000Nm³/h
Location:Indoor
Paint Collour:Silver(40μ)
Voltage: *Voltage shall be appointed when you will order.
〒535-0022
大阪市旭区新森2丁目22番22号 >>MAP
TEL(06)6952-8451(代表)
FAX(06)6954-8573